Fishing/Electric Motors

Watermakers/Filteration

Tested Daily 12/1/2008

Home > Shop Our Categories > Pumps / Plumbing > Bilge Pumps

Rule-Mate® 750 Automatic Bilge Pump, Part # RM750

Rule-Mate® 750

Fully Automated Bilge Pump

Rule introduces the rule-mate™ series of bilge pumps. The rule-mate consists of a powerful rule bilge pump and a new non-mecury float switch in a single housing. While fully automated, the pump will only turn on when the water level rises. There is no cycling and battery drain. The pump remains off until the internal float switch rises. The pump then stays on until the water is evacuated. The pumps internal computer senses no load (Water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for removal of debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired. The rule-mate bigle pump is thoughtfully designed, and due to its compact profile, can be used in practically all bilge pumping applications.

Out of Stock. Please check back soon.

Please note: we will never sell your e-mail or send you unsoliciated e-mail.

$79.99

HAVE THIS ITEM TOMORROW FOR ONLY 19.95!

Warning All Images Are Copyrited And Protected With Digimark!