Fishing/Electric Motors

Watermakers/Filteration

Tested Daily 11/20/2008

Home > Shop Our Categories > GPS & Electronics > Automatic Identification Systems

Raymarine Automatic Identification System Receiver, Part # E03015

AIS250

Automatic Identification System (AIS) Receiver with VHF splitter and NMEA multiplexer

The Raymarine AIS250 Receiver module is a listen only AIS receiver that easily integrates with an existing VHF antenna using a built in VHF splitter. The AIS250 then interfaces to Raymarine multifunction displays, allowing AIS targets to be graphically overlaid in both the chartplotter and radar modes.

Operating in the VHF maritime band, the AIS system enables the wireless exchange of navigation status between vessels and shore-side traffic monitoring centers. Commercial ships, ocean going vessels and other boats equipped with AIS transmitters broadcast AIS messages that include the vessels name, course, speed, and current navigation status.

AIS250 Features:

Monitoring of class A and B AIS broadcasts
Overlay AIS targets on Raymarine multifunction displays in both chartplotter and radar modes
AIS target tracking enhances your situational awareness by monitoring a targets name, course, speed, and navigation status
Reconcile AIS targets with radar targets for added safety
Built-in VHF/FM antenna splitter. No additional antenna required
Two NMEA 0183 input and two NMEA 0183 output ports with a built-in multiplexer
Support for NMEA 0183 at both 4800 and 38,400 baud

AIS250 System Requirements

VHF Antenna
Chartplotter, Multifunction display or PC application with NMEA 0183 input and AIS compatibility

Raymarine Multifunction Displays Requirements

C-Series software version 3.18 or higher
E-Series software version 3.22 or higher

In stock

$1,120.00

Warning All Images Are Copyrited And Protected With Digimark!