| Make-before-break contact design allows switching between battery banks without power interruption
Includes AFD (Alternator Field Disconnect)
Marked CE
Ignition protected - Safe for installation aboard gasoline powered boats
Case design allows surface or rear panel mounting
Meets American Boat and Yacht Council (ABYC) requirements for battery switches
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
7/8" (22.22mm) stud length to accept multiple cable terminals
Tactile textures indicate knob position by feel only
Specifications
| Terminal Stud Torque |
140 in-lbs.(15.82 N.m) |
| Continuous Rating: (UL 1107) |
350 Amperes DC |
| Weight Lb (Kg) |
1.15 (0.52) |
| Cable Size to Meet Ratings |
4/0 (95 mm2) |
| Terminal Stud, Tin-Plated Copper |
3/8" (accepts M10 terminal ring) |
| Agency Standards |
UL Listed - UL 1107 Electric Power Switch / Meets UL 1500 and SAE J171 ignition protection requirements |
| Inrush Rating: 0.25 sec (10 repeats)* |
1750 Amperes DC |
| Maximum Voltage Rating |
48 Volts DC |
| Cranking Rating: 9.75 sec (10 repeats)* |
900 Amperes DC |
| Case Material |
Reinforced Polycarbonate |
| Intermittent Rating: 5 min (UL 1107) |
600 Amperes DC |
| Cable Clearance For 4/0 AWG Cables |
1.10" (27.9mm) |
In stock
$47.97
| 
