Fishing/Electric Motors

Watermakers/Filteration

Tested Daily 12/3/2008

Home > Shop Our Categories > Anchors & Docking > Anchor Windless

MAXWELL Freedom RC500, Part # P100000/50

FREEDOM

Features:

Maxwells revolutionary design automatically feeds anchor rode into and out of the anchor locker allowing effortless handling of rope, chain or rope/chain rodes.
Sleek, captive on deck design for smooth, snag free operation.
Trouble free transition from rope to chain by means of an innovative tension arm system within a safer enclosed design.
Maxwell recommends the use of 8 plait nylon rope in conjunction with Maxwells unique performance plate (supplied with winch) to help ensure trouble free performance.
High speed, jam free retrieval of rope and chain from remote control stations.
Dual direction, power up and down operation.
Simplified two piece installation without disassembly of windlass.
Alternative gearbox/motor positions accommodate virtually all installation situations.
Manual override using the emergency crank handle provided.
Marine-grade, hard anodised alloy housing finished in metallic charcoal.
Full disassembly capability of top works utilising handle provided and a screwdriver - no special tools required.
Heavy duty, dual direction motor, designed for marine winches.
Isolated ground type, with durable class F insulation. Easily removed for servicing.
Cone type clutch/brake mechanism permits manual "free fall" anchoring. Cone clutches, unlike dog clutches, provide smooth disengagement, ensuring safe operator control.

Sealed oil bath and marine-grade anodised alloy gearbox provides high efficiency output drive via precision worm and wormwheel.

Important: Maxwell windlasses must be used in conjunction with a chain stopper or snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system can also be used to secure the anchor in the fully raised position while under way.

STANDARD EQUIPMENT

Circuit breaker/isolator panel (supplied with DC units only)
Dual direction solenoid pack
Up/down remote control panel
Performance plate

SPECIFICATIONS
Maximum Pull	227kg - 500 lbs
Chain Speed (Normal Working)	19m/min - 62ft/min
Rope Speed (Normal Working)	14m/min - 45ft/min
Power Supply (DC)	12 or 24V
Motor (Watts)	600w
Rope Size (Nylon) ( 3 strand or 8 plait)	12mm - 1/2"
Chain Short Link	6mm - 1/4"
Net Weight	12.5kg - 27.5 lbs

Warranty: 3 year.

In stock

$1,840.00

HAVE THIS ITEM TOMORROW FOR ONLY 19.95!

Warning All Images Are Copyrited And Protected With Digimark!