Fishing/Electric Motors

Watermakers/Filteration

Tested Daily 8/28/2008

Home > Shop Our Categories > Watermakers/Filteration

Katadyn Powersurvivor-160E, Part # 8013421

PowerSurvivor-160E

The 160E model offers the same reliable performance as the 80E, with nearly double the output. Its a great choice for larger crews.

Simplicity - The 160E is the easiest to maintain of any product at this output level. Periodic maintenance can be performed with only a few common tools and easy to follow instructions. Simple to install, operate and maintain.

Compactness - The 160E is very compact. With separation of the membrane module and the pump/motor unit, the 160E can fit into even the tightest of spaces.

Efficiency - Using the patented Energy Recovery System, the 160E produces copious amounts of water with low energy consumption.

Durabilty - The 160E uses 316 stainless steel for pump housings. As with all of our models, they are covered by the best warranty in the business: 3 years on most components.

Specifications

The PowerSurvivor-160E delivers an impressive 6.7 gallons per hour with
the simplicity of the smaller systems.

Power Requirements:

12 volts DC (draws 18 amps)/24 volt DC (draws 12 amps)

Water Production (+/- 15%):

6.7 gallons/hour (25.4 liters/hour)

Weight:

36 lbs (16.3 kg)

Dimensions:

Pump:

Height: 6" (15.2 cm)

Length: 16" (40.6 cm)

Width: 14" (35.6 cm)

Membrane Module:

Length: 25" (63.5 cm)

Diameter: 3.5" (8.9 cm)

Prefilter Module:

Length: 12" (30.5 cm)

Diameter: 6" (15.2 cm) (allow 7" (18 cm) for hose bend)

Feedwater Flow Rate:

80 gallons/hour (302.8 liters/hour)

Salt Rejection:

98.4% average (96% minimum)

Hand-held Salinity/TDS Meter:

Standard

Special order only, call for availability.

$4,495.00

Warning All Images Are Protected!